Flexible and Swappable Input Modules With Built-in Signal Conditioning

Choose from 20 types of input modules and install up to 8 in the DL850E ScopeCorder at a time to capture up to 128 channels. Input types include:

• Voltage & Currents
• Sensor Outputs
• Temperature, Vibration/Acceleration, Strain, Frequency
• Logic Signals & CAN / CAN FD / LIN and SENT

Eliminate Post Processing

Optional Real-Time Math Processing
Available real-time digital signal processors calculate math functions or electrical power parameters. Results are plotted on the screen in real-time and can be measured with cursors, captured with triggers, and saved to disk.

GiGAZoom Engine II
Zoom into two billion samples in just the blink of an eye. A dedicated zoom processor can operate two zoom windows with zero delay.

Cursor Measurement
Available cursors are horizontal, vertical, marker, degree or combined horizontal & vertical.

Automated Parameter Measurement
Measure up to 29 different waveform parameters in different time conditions, including:

• Entire waveform
• Per cycle
• Between cursors
• Cycle statistics
• History statistics

Never Miss a Data Point
Capture data for up to 200 days using up to 2Gpoint memory and optional hard disk recording. The History Memory function saves previous trigger data for later search and analysis.

The dual capture function is ideal for long-term testing. Capture the important transient events at a high sample rate while recording steady-state data at a low sample rate. The DL850E automatically switches to a high sampling rate when the trigger condition is met.

Time Synchronization

Correlate data with important events using the optional GPS and IRIG timing functions. The DL850E internal clock and sample clock can be aligned to synchronize multiple systems in remote locations. Merge data sets using XViewer PC software for easier analysis.

Brochures

•  DL850E/DL850EV ScopeCorder (5.5 MB)
•  Plug-in modules specifications ScopeCorder series DL850E/DL850EV/DL350/SL1000 (4.2 MB)
•  ScopeCorder DL850E/DL850EV Introduction for Firmware Ver. 3.21 (750 KB)

Instruction Manuals

•  DL850E/DL850EV ScopeCorder Features Guide (13.9 MB)
•  DL850E/DL850EV ScopeCorder User's Manual (8.7 MB)
•  DL850E/DL850EV ScopeCorder Getting Started Guide (14.8 MB)
•  DL850E/DL850EV ScopeCorder Communication Interface User's Manual (4.2 MB)
•  DL850E/DL850EV ScopeCorder Real Time Math (/G3)/Power Math (/G5) User's Manual (4.8 MB)
•  DL850E/DL850EV Acquisition Software User's Manual (4.0 MB)
•  Precaution Concerning the Modules (121 KB)
•  DL850E/DL850EV FreeRun Application Programming Interface User's Manual (404 KB)
•  Model DL850E ScopeCorder Model DL850EV ScopeCorder Vehicle Edition Radio Equipment Directive(RED) (149 KB)

Specifications

•  Bulletin DL850E-00 (EU - English) (2.7 MB)
•  Bulletin DL850E-00 (German) (2.7 MB)
•  Bulletin DL850E-00 (Spanish) (2.6 MB)
•  Bulletin DL850E-00 (Italian) (2.6 MB)
•  Bulletin DL850E-00 (French) (2.7 MB)

Software

•  Xviewer 701992 / XviewerLITE
•  MATLAB tool kit for DL series
•  LabVIEW drivers for DL850 series ( NATIONAL INSTRUMENTS Web Page )
•  DL-Term
•  Xwirepuller
•  DL850E/DL850EV Acquisition Software
•  WDF File Access Library
•  USB Driver
•  DL850E/DL850EV Free-Run Library
•  TMCTL
•  Symbol Editor
•  MATLAB WDF Access Toolbox

Firmware

•  DL850 series ScopeCorder