Product Detail
- Yokogawa - DLM9000
- ID: DLM9000
- Price: call
 |
|
Model: DLM9000 Maker: Yokogawa |
| Model: Yokogawa DL9000 DSO – Digital Storage Oscilloscopes | ||||||
Models |
DL9040 | DL9040L | DL9140 | DL9140L | DL9240 | DL9240L |
| Maximum sample rate | 5GS/s | 5GS/s | 5GS/s | 5GS/s | 10 GS/s | 10 GS/s |
| Frequency bandwidth | 500 MHz | 500 MHz | 1.0 GHz | 1.0 GHz | 1.5 GHz | 1.5 GHz |
| Maximum Record length | 2.5 Mpts | 6.25Mpts | 2.5 Mpts | 6.25Mpts | 2.5 Mpts | 6.25 Mpts |
| Channel | 4 ch | 4 ch | 4 ch | 4 ch | 4 ch | 4 ch |
Display—- |
||||||
| Display: | 8.4-inch (21.3 cm) TFT color liquid crystal display | |||||
| Screen size: | 170.5 mm (W) x 127.9 mm (H) | |||||
| Total pixels: | 1024×768 (XGA) (waveform display pixels 800 x 640) | |||||
Analog input |
||||||
| Input coupling setting: | AC, DC, GND, DC50 Ω | |||||
| Input impedance: | 1 MΩ±1.0%, approximately 20 pF | 50 Ω±1.5% | |||||
| Voltage axis sensitivity setting range: | 1 MΩ: 2 mV/div to 5 V/div (steps of 1-2-5) 50 Ω: 2 mV/div to 500 mV/div (steps of 1-2-5) |
|||||
| Max. input voltage: | 1 MΩ: 150 Vrms CATl (when frequency is 1 kHz or less) 50 Ω: 5 Vrms or less, or 10 Vpeak or less |
|||||
| DC accuracy: | 1 MΩ: ±(1.5% of 8 div + offset voltage accuracy) 50 Ω: ±(1.5% of 8 div + offset voltage accuracy) |
|||||
| Offset voltage accuracy: | 2 mV/div to 50 mV/div: ±(1% of setting + 0.2 mV) 100 mV/div to 500 mV/div: ±(1% of setting + 2 mV) 1 V/div to 5 V/div: ±(1% of setting + 20 mV) |
|||||
| A/D Resolution: | 8 bit (25LSB/div) | |||||
| Bandwidth limit: | For each channel, select from FULL, 200 MHz, 20 MHz, 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz, 62.5 kHz, 32 kHz, 16 kHz, and 8 kHz (separately configurable on each of channels CH1 to CH4); Limit implemented with analog (200 MHz, 20 MHz) and digital filters (IIR+ FIR) | |||||
Max. Sampling Rate |
||||||
| Interleave mode ON | 5 GS/s | |||||
| Interleave mode OFF | 2.5 GS/s | |||||
| Repetitive sampling mode: | 2.5TS/s | |||||
| Time axis setting range: | 500 ps/div to 50 s/div (steps of 1-2-5) | |||||
| Time base accuracy: | ±0.001% | |||||
| Max. acquisition rate: | When using 1.25 MW, 60 waveforms/sec/ch When using 12.5 kW, 9000 waveforms/sec/ch When using 2.5 kW, 25000 waveforms/sec/ch |
|||||
| Dead time in N Single mode | Min. 400 ns or less (equivalent to 2.5 million waveforms/sec) | |||||
Built-in Printer (/B5 Option) |
||||||
| Print type | Thermal line/dot matrix | |||||
| Paper width | 112 mm | |||||
| Effective print width | 104 mm (832 dots) | |||||
PC Card Interface |
||||||
| Slots | 2 (front panel (1), rear panel (1)) | |||||
| Supported card | GPIB card (National Instruments NI PCMCIA-GPIB card), Flash ATA memory card (PC card TYPE II), CF card + adapter card, and various hard disk type PC cards |
|||||
Storage |
||||||
| Built-in storage media | 40 GB FAT32 (optional) | |||||
| Flash ROM | 90-MB flash ROM (standard) Application Saving and loading waveforms/panel settings |
|||||
Environment |
||||||
| Power supply: | 100 to 120 VAC/200 to 240 VAC (auto switching) /50/60Hz | |||||
| Power consumption: | Max 300 VA | |||||
| Operating Temperature: | 5C° to 40C° | |||||
| Dimensions: | 350(W) x 200(H) x 285(D) mm | |||||
| Weight: | Approx. 7.7 kg | |||||
